Power Generation Thermal Monitoring
Thermal · wind · hydro · PV · biomass · nuclear power
Every kilowatt made visible and quantifiable
Where thermal imaging pays off
Carbon brush monitoring
7×24 brush-ring thermography, 80°C warn / 100°C alarm. Burnout incidents -95%
Coal conveyor fire prevention
Full-surface smoldering detection linked to sprinkler & e-stop. Fires -95%
Coal bunker monitoring
256-preset PTZ patrol, spontaneous combustion detected 4-8h earlier
Wind turbine monitoring
Generator, gearbox, brake disc thermography. Failures -85%
PV hot-spot detection
Panoramic scanning, hot spots auto-located. Detection +90%
Substation monitoring
DL/T 664-2016 graded diagnosis. Incidents -85%
Proven results
Coal system fire prevention, fires -95%
Electrical equipment monitoring, incidents -85%
Carbon brush & conveyor 7×24 monitoring
Recommended thermal cameras
Frequently asked questions
Which thermal camera should I choose for power generation?
Selection depends on target distance, required spatial resolution and temperature range. Recommended models: ET-640FH, ET-640HYC, ET-640TD. — send your parameters to yichuanqifeng@163.com and our engineers will recommend a configuration.
Can the system be integrated with our existing PLC / SCADA?
Yes. Our online thermal cameras provide Ethernet with Modbus TCP, ONVIF and an open SDK, so temperature data and alarms can be pushed to PLC, SCADA or MES systems.
Do you provide on-site commissioning?
Remote commissioning and parameter tuning are included. On-site support is available for large projects in China and can be arranged overseas together with our distributor.
Other applications
Discuss your project
Send your process details and the temperature range. We reply with a camera, lens and mounting plan.
Thank you. An engineer will reply within one working day.
Talk to an application engineer
Send a photo of your process and the temperature range you need to monitor — we will propose a camera, lens and mounting plan.


