Fiber Laser Thermal Monitoring
5 inspection scenarios: weld spots · combiners · pump sources · coatings · reflection protection
See laser quality, quantify optical-path health
Where thermal imaging pays off
Weld spot inspection
Monitor 7-8 weld spots at 1000W full power, ≤45°C red line. Miss rate down from 8% to 0.3%; test time 4h → 1.5h
Combiner inspection
Shell & end-face temperature check before shipment. Defect rate down 65%, return claims down 80%
Pump source diagnostics
Full-channel ROI + radiometric video. Wavelength drift warning 72h ahead, yield up 12%
Coating inspection
Forward-laser scan to locate coating damage hot spots, 100% coverage, zero missed defects
Reflection protection
Reverse-laser simulation, all parts ≤45°C, 100% automated pass rate
Proven results
50h monitoring with temperature curves: miss rate 8%→0.3%, test time 4h→1.5h
Zoned emissivity + equalization: defects -65%, claims -80%
0.1mm weld recognition: drift warning 72h ahead, yield +12%
Recommended thermal cameras
Frequently asked questions
Which thermal camera should I choose for fiber laser?
Selection depends on target distance, required spatial resolution and temperature range. Recommended models: ET-640M, ETMC-640, ET-640FH. — send your parameters to yichuanqifeng@163.com and our engineers will recommend a configuration.
Can the system be integrated with our existing PLC / SCADA?
Yes. Our online thermal cameras provide Ethernet with Modbus TCP, ONVIF and an open SDK, so temperature data and alarms can be pushed to PLC, SCADA or MES systems.
Do you provide on-site commissioning?
Remote commissioning and parameter tuning are included. On-site support is available for large projects in China and can be arranged overseas together with our distributor.
Other applications
Discuss your project
Send your process details and the temperature range. We reply with a camera, lens and mounting plan.
Thank you. An engineer will reply within one working day.
Talk to an application engineer
Send a photo of your process and the temperature range you need to monitor — we will propose a camera, lens and mounting plan.


